Icom IC-R9500, Инструкция по эксплуатации

Страница: 71 / 188

5-7
D D
Scope set mode (continued)
5
RECEIVE FUNCTIONS
Turn the peak level holding function ON or OFF.
Max Hold ON
Select the center frequency of the spectrum scope
indication (center mode only). • Filter center : Shows the selected filter’s center
frequency at the center.
• Carrier Point Center
: Shows the selected operating
mode carrier point frequency at
the center.
• Carrier Point Center (Abs. Freq.)
: In addition to the carrier point
center setting above, the actual
frequency is displayed at the bot-
tom of the scope.
Center Type Display Filter Center
Set the waveform color for the currently received sig-
nals. • The color is set in RGB format.
• Push [F-3•
Ω ≈ ] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
Waveform Color (Current) 161 185 221
Set the waveform color for the receiving signals max-
imum level. • The color is set in RGB format.
• Push [F-3•
Ω ≈ ] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
Waveform Color (Max Hold) 130 66 176
Set the marker color for the displayed frequency while
the fix mode. • The color is set in RGB format.
• Push [F-3•
Ω ≈ ] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
Marker Color (RX) 255 150 50
Set the marker color for the peak frequency of the re-
ceiving signals. • The color is set in RGB format.
• Push [F-3•
Ω ≈ ] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
Waveform Color (Max Hold) 130 66 176