Icom IC-R9500, Инструкция по эксплуатации

Страница: 150 / 188

11-26
11
SET MODE
■
LCD set mode
This set mode is used to set the LCD contrast, bright-
ness and other settings for 2 condition of the dimmer
function ON and OFF.
q
Push [LCD SET] to select LCD set mode.
w
Push [DIMMER] once or twice to select the dimmer
function ON or OFF.
e
Push [F-1•
Y
] or [F-2•
Z
] to select the desired set
item.
r
Set the desired condition using the main dial.
• Push and hold [F-4•DEF] for 1 sec. to select a default
condition or value.
• Push and hold [DIMMER] for 1 sec. to reset to a default
condition or value for all items at the same time.
t
Push [DIMMER] once to select the other dimmer
setting, and repeat steps
e
and
r
.
• Dimmer function OFF
y
Push [EXIT/SET] to exit from set mode.
• Dimmer function ON
[EXIT/SET] [DIMMER] [LCD SET] Main dial
[F-1• Y ] [F-2• Z ] [F-4•DEF]
Adjusts the brightness of LCD unit from 0 (dark) to
100% (bright) range in 1% steps. Default setting:
Dimmer function OFF : 50%
Dimmer function ON : 50%
Adjusts the brightness of switch indicators from 1
(dark) to 100 (bright) range in 1 steps. Default setting:
Dimmer function OFF : 50%
Dimmer function ON : 25%
LCD Unit Bright 50%
Backlight (Switches) 50%
Adjusts the contrast of the LCD from 0 (low contrast)
to 100% (high contrast) range in 1% steps. Default setting:
Dimmer function OFF : 75%
Dimmer function ON : 25%
Contrast (LCD) 75%
Adjusts the brightness of the LCD from 0 (dark) to
100% (bright) range in 1% steps. Default setting:
Dimmer function OFF : 100%
Dimmer function ON : 25%
Bright (LCD) 100%