Icom IC-R9500, Инструкция по эксплуатации

Страница: 170 / 188

13-10
13
CONTROL COMMAND
D D
To send/read memory contents
When sending or reading memory contents, additional
codes must be added to appoint the memory channel
as follows.
➥
Additional code: 0000–1219
• Memory channel code
• Memory bank code
D D
Codes for memory name, bank name,
opening message and clock 2 name
contents
To send or read the desired memory name settings,
the character codes as follows are used.
•
Character’s code
• Character’s code— Symbols
D D
Offset frequency setting
The following data sequence is used when sending or
reading the offset frequency setting.
D D
Tone squelch frequency setting
The following data sequence is used when sending or
reading the tone frequency setting.
D D
DTCS squelch code setting
The following data sequence is used when sending or
reading the DTCS code setting.
DTCS Polarity
†, ‡
: 0. 1
100 digit: 0–7 10 digit: 0–7 1 digit: 0–7 Fixed digit: 0
†
Fixed digit: 0
q †
0 0 X X X
w e
X
†
Not necessary when normal is set.
‡
0=Normal, 1=Reverse
100Hz digit: 0–2 10 Hz digit: 0–9 1 Hz digit: 0–9 0.1 Hz digit: 0–9 Fixed digit: 0* Fixed digit: 0*
q
*
0 0 X X X
w e
X
*Not necessary when setting a frequency.
1 kHz digit: 0–9 100 Hz digit: 0 (fixed) 100 kHz digit: 0–9 10 kHz digit: 0–9 10 MHz digit: 0–9 1 MHz digit: 0–4
q
0 X X X X X X
w e r
0
1 GHz digit: 0 (fixed) 100 MHz digit: 0–4
Character ASCII code Description
0–9 30–39 Numerals
A–Z 41–5A Alphabetical characters
a–z 61–7A Alphabetical characters
space 20 Word space
Character ASCII code Character ASCII code
! 21 # 23
$ 24 % 25
& 26 ¥ 5C
? 3F ” 22
’ 27 ` 60
^ 5E + 2B
– 2D
✱
2A
/ 2F . 2E
, 2C : 3A
; 3B = 3D
< 3C > 3E
( 28 ) 29
[ 5B ] 5D
{ 7B } 7D
| 7C _ 5F
–
7E @ 40
Code Bank number Memory Cnannel
0000–0999 Bank-0–Bank-9 0–999
1000–1099 Bank-A (Auto) A00–A99
1100–1199 Bank-S (Skip) S00–S99
1200–1219 Bank-P (Scan edge) P0A–P9B
Code Bank number
00–09 Bank-0–Bank-9
10 Bank-A (Auto)
11 Bank-S (Slip)
12 Bank-P (Scan edge)