Icom IC-R9500, Инструкция по эксплуатации

Страница: 144 / 188

11-20
11
SET MODE
■
Changing the file name
The file name, saved in the CF memory card or USB-
memory, can be re-named from the receiver as de-
sired.
q
During setting save screen display, push
[F-1•DIR/FILE] to select tree view screen.
• Push and hold [F-1•DIR/FILE] for 1 sec. once or twice
to select the CF card or USB-Memory, when USB mem-
ory is Inserted.
• Push [F-2•
Y
] or [F-3•
Z
] to select the desired folder.
• “DECODE,” “SETTING” and “VOICE” folders are avail-
able as the default.
• After the folder is selected, push and hold [F-4• Ω ≈ ] for
1 sec. to display content folder(s), if available.
w
Push [F-1•DIR/FILE] to select file list screen.
e
Push [F-2•
Y
] or [F-3•
Z
] to select the desired file.
r
Push [F-5•REN/DEL] momentarily to select the file
name edit condition.
t
Push [ABC], [123] or [Symbol] to select the charac-
ter group, then rotate the main dial to select the
character.
• Push [123] or [Symbol] to toggle numerals and symbols.
• [ABC] : A to Z (capital letters); [123]: 0 to 9 (numerals);
[Symbol]: ! # $ % & ‘ ` ^ + – = ( ) [ ] { } _ ~ @ can be se-
lected.
• Push [F-1• Ω ] to move the cursor left, push [F-2• ≈ ] to
move the cursor right, push [F-3•DEL] to delete a char-
acter and push [F-4•SPACE] to insert a space.
• Using the receiver’s keypad, [0]–[9], can also enter nu-
merals.
y
Push [EXIT/SET] to set the file name.
[F-1•DIR/FILE]
[F-5•REN/DEL] [F-4•
Ω ≈
] [F-7•WIDE]
[F-3• Z ] [F-2• Y ] [EXIT/SET]