Icom IC-R9500 Скачать руководство пользователя страница 180

Страница: 180 / 188

15-4

■

Firmware update—USB-Memory

When updating the firmware with the CF card or USB-
Memory, no IP address or subnet mask settings are
necessary.

Copy the downloaded firmware data into the USB-
Memory (“IC-R9500” folder).

• The USB-Memory must have been formatted by the IC-

R9500.

Insert the USB-Memory into the USB connector.

Push [EXIT/SET] several times to close a multi-
function screen, if necessary.

Push [F-7•SET] to select set mode menu screen.

Push [F-7•CF/USB] to select CF/USB-Memory set
menu.

Push and hold [F-3•FIRM UP] for 1 sec.

Read the displayed precautions carefully.

• Push [F-1•

] or [F-2•

] to scroll the text.

• Push [F-7•CANCEL] to cancel firmware updating.

After you read and understand all of the precau-
tions, push [F-6•OK].

• [F-6•OK] appears only following the precautions.
• Push [F-7•CANCEL] to cancel the firmware updating.

Push [F-2•

] or [F-3•

] to select the firmware file,

then push [F-4•FIRM UP].

• Push and hold [F-1•DIR/FILE] for 1 sec. to select the

USB-Memory, if CF card is selected.

Read the displayed precautions carefully.

If you agree, push [F-6•OK] for 1 sec. to start the
firmware update.

• Push [F-7•CANCEL] to cancel firmware updating.

While loading the firmware from the CF memory
card, the dialog at left is displayed.

[EXIT/SET]

[F-2•

]/[F-2•

]

[F-3•FIRM UP]/[F-3•

] [F-6•OK]

[F-1•

]/[F-1•DIR/FILE]

[F-7•SET]/[F-7•CF/USB]

/[F-7•CANCEL]

[F-4•FIRM UP]

UPDATING THE FIRMWARE

Содержание IC-R9500





























































































































































































Результаты поиска

Содержание IC-R9500

Отзывы:

Похожие инструкции для IC-R9500

Бренды по названию

Популярные бренды

Icom IC-R9500, Инструкция по эксплуатации

Результаты поиска

Содержание IC-R9500

Отзывы:

Похожие инструкции для IC-R9500

Бренды по названию

Популярные бренды