Icom IC-R9500, Инструкция по эксплуатации

Страница: 16 / 188

1-6
■
Front panel (continued)
#3
TUNING STEP SWITCHES [
▲
UP]/[
▼
DOWM]
(p. 3-5)
➥
Select the tuning step for the main dial. Push
[
▲
UP] to select a larger tuning step; push
[
▼
DOWN] to select a smaller tuning step.
• 1 Hz, 10 Hz, 100 Hz, 1 kHz, 2.5 kHz, 5 kHz, 6.25
kHz, 9 kHz, 10 kHz, 12.5 kHz, 20 kHz, 25 kHz, 100
kHz and 1 MHz are selectable.
• Programmable tuning steps can be set between 0.1
and 999.9 kHz in 0.1 kHz steps.
➠
To set programmable tuning steps, enter the de-
sired steps via the keypad, then push [
Y
UP] or
[
Z
DOWN].
➥
Push and hold [
▲
UP] (or [
▼
DOWN]) for 1 sec.
to enter the tuning step select screen.
• Unwanted tuning step for each operating mode can
be skipped in the tuning step select.
#4
MEMORY TRANSFER SWITCH [M ≈ ≈ V] (p. 7-5)
Transfers the memory contents to VFO when
pushed and held for 1 sec.
• This function is available both in VFO and memory
modes.
#5
MEMORY SWITCH [MEMO] (p.7-3)
➥
Selects the memory mode when pushed.
• After pushing one to three digit (0 to 999), pushing
the switch selects a memory channel.
➥
Memory bank limit function ON or OFF when
pushed and held for 1 sec.
#6
VFO SWITCH [VFO]
Selects the VFO mode when pushed. (p. 3-3)
• After pushing a digit switch (0 to 9), push this switch se-
lects a VFO mode (VFO-0 to VFO-9).
#7
KEYPAD (pgs. 3-3, 3-4, 7-3)
Enters a frequency or memory channel. Pushing
[ENT], [VFO] or [MEMO] ends keypad input.
• e.g. to enter 14.195 MHz, push [1] [4] [•] [1] [9] [5]
[ENT].
#8
ENTER SWITCH [ENT]
Enters input frequency. (pgs. 3-4)
#9
MEMORY WRITE SWITCH [MW] (p. 7-4)
Stores the selected readout frequency and operat-
ing mode into the displayed memory channel when
pushed and held for 1 sec.
• This function is available both in VFO and memory
modes.
$0
MEMORY CLEAR SWITCH [M-CL] (p. 7-7)
Push and hold to clear the contents of displayed
memory channel.
$1
SPEAKER
Outputs audio signals.
$2
1/4-SPEED TUNING SWITCH [1/4]
➥
Push to turn the 1 ⁄
4
-speed tuning function ON or
OFF in CW and FSK modes. (p. 3-6)
• “ 1 ⁄
4
” appears when 1 ⁄
4
function is in use.
•
1
⁄
4
function sets dial rotation to
1
⁄
4
of normal speed
for fine tuning.
➥
Push and hold to turn the dial click function ON
or OFF. (p. 9-3)
$3
AUTOMATIC TUNING SWITCH [AUTOTUNE]
Turns the automatic tuning function ON or OFF in
AM, SSB and CW modes.
1
PANEL DESCRIPTION
$8 $9 %1 $5 $4 $6 $7
#3 #6 $1 #5 #4 #8 #9 $0 $2 $3 #7
%9
^0
%2 %4 %5 %6 %3 %7 %8 %0