10
Clock and Timer
10-2
D
Setting the Sleep timer
The Sleep timer automatically turns OFF the receiver
power after the set period of time ends.
• Settable range : 5 ~ 120 minutes (in 5 minutes steps)
1. Hold down
for 1 second.
2. Touch [Sleep Timer].
3. Rotate
to set the desired length of time.
4. Touch [SET].
•The timer LED
lights orange.
• 10 seconds before the sleep timer period ends, the
receiver starts sounding beeps and the timer LED
blinking, then turns OFF.
L
When the sleep timer ends, the time period set in
step 3 is cleared.
L
Each push of
stops and resumes the timer.
5. To close the TIMER screen, push
EXIT
several
times.
D
Setting the Daily timer
The IC-R8600 automatically turns power ON or OFF
on the specified day and time.
L
You can set up to 3 timer slots for different timer setting.
1. Hold down
for 1 second.
2. Touch to select a timer slot.
3. Rotate
to set each item for the timer slot.
(Example: TIMER1).
L
See page 10-3 for each item's details.
L
Push
to reset to the default setting or cancel.
4. After you configure the Timer, touch [<<Set>>].
•The "Set Timer?" dialog appears.
5. Touch [YES].
•The timer LED
lights orange.
L
When the Power OFF Timer is set:
10 seconds before
the sleep timer period ends, the receiver starts sounding
beeps and the timer LED blinking, then turns OFF.
L
Each push of
stops and resumes the timer.
6. To close the TIMER screen, push
EXIT
several times.
Timer
TIMER screen
Timer activated
Reserved channel
Day of the week
Power OFF time
Power ON time
Repeat ON
NOTE: About the Timer accuracy
Since the Sleep timer counts in ‘minute’ steps (not
counts in ‘second’ steps), it may have maximum 59
seconds of error.