![background image](http://html2.mh-extra.com/html/icom/ic-r8600/ic-r8600_instruction-manual_3618981018.webp)
2
INSTALLATION AND CONNECTIONS
2-1
2-1
Selecting a location
For desktop use
Select a location for the receiver that allows adequate
air circulation, free from extreme heat, cold or
vibrations, and other electromagnetic sources.
An improper location may damage the receiver.
Never place the receiver in areas such as:
• Temperatures below –10°C (+40°F) or above +60°C
(+140°F).
• Unstable place slope or vibrate.
• In direct sunlight.
• High humidity and temperature.
• Dusty environments.
• Noisy environments.
D
Power supply
You can use any of the power sources listed below.
•13.8 V DC power supply (User supplied)
•Optional SP-39AD (External speaker with built-in power supply)
•Optional AD-55NS (Power adapter)
D
Turning the receiver's power ON or OFF
z
Push
to turn ON the power.
z
Hold down
until the "POWER OFF..." is
displayed.
The receiver has a stand for desktop use.
z
Pull the stand until it locks in place.
CAUTION: NEVER
carry the receiver by holding the stand,
dials, controls and so on. This may damage them.
Heat dissipation
Grounding
To prevent electrical shock, interfere
from other electric devices and other
problems, ground the receiver using
the ground terminal [GND] on the rear
panel.
For best results, connect a heavy
gauge wire or strap to a long ground
rod. Make the distance between the
[GND] terminal and ground as short as
possible.
R
WARNING! NEVER
connect the [GND] terminal
to a gas or electric pipe, since the connection could
cause an explosion or electric shock.
•
DO NOT
place the receiver against walls, or put
anything on top of the receiver. This may block airflow.
•
NEVER
install the receiver in a place without
adequate ventilation. Heat dissipation may be
reduced, and the receiver may be damaged.
Stand
Connecting a DC power supply
+
_
IC-R8600
AC outlet
When disconnecting,
firmly push down the
locking tab and then pull
the connector out of the
socket.
AC outlet
Short connector:
Connect when
SP-39AD or
AD-55NS is used.
AC outlet
DC power cable
AD-55NS (Option)
SP-39AD
(Option)
Speaker
cable
Supplied DC power cable
Red
External power supply
(User supplied)
Black