Icom IC-R8600, Инструкция по эксплуатации

Страница: 59 / 96

9-6
Auto Memory Write scan
D
Auto Memory Write scan operation
1. Open the SCAN screen.
MENU
» SCAN
2. Touch [TYPE/SET].
3. Touch [AUTO].
4. Touch [SELECT] to select the item*, then rotate
to change the settings.
* Program Scan Edge number (Example: P00A/P00B),
scan edges (lower and upper frequencies), receive
mode, filter and tuning step (TS).
L
The changed settings are stored in the Program Scan
Edge channel.
Auto Memory Write scan
When a signal is received during a Programmed scan, the
frequency is automatically stored into an Auto Memory
Write channel group (A000 ~ A199).
L
When no blank channels is left in group A (A000 ~ A199),
the Auto Memory Write scan automatically cancels.
You can clear the all channels in group A (A000 ~ A199)
every time you start a Auto Memory Write scan.
See page 9-3 for details.
L
The channels in group A (A000 ~ A199) are automatically
aligned at the top, and all the blank channels are
removed (A000 ~ A199).
5. Touch [SELECT] several times to exit the edit
mode, then touch [START].
• The confirmation dialog is displayed.
6. Touch [YES].
• The Auto Memory Write scan starts.
L
If you do not want to clear the memory channels in
the group A (A000 ~ A199), touch [NO].
L
To cancel the scan, touch [STOP] or push .
7. To close the SCAN screen, push
EXIT
.
A000
A002
A001
A199
85.100
80.200
76.500
– – –
– – –
Blinks
Recalls the VFO
frequency before
the scan starts
Jumps to the lower edge
SCAN screen
9
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Scanning
Scan range
Jump
Signal
received
Signal
received
Auto MW CH group
Channel Frequency
Signal
received
The received signal frequency is stored
into an Automatic Memory Write group