Icom IC-M220 Скачать руководство пользователя страница 39

Страница: 39 / 66

DIGITAL SELECTIVE CALLING (DSC)

■

Receiving DSC calls (other)

The transceiver receives the following types of DSC calls.

•Individual call (p. 29)

•

Individual Acknowledgement

(p. 21)

•Group call (p. 30)

•All Ships call (p. 30)

•

Position Request call

(p. 31)

•Test call (p. 32)

•

Test Acknowledgement

(p. 24)

The receivable call types may differ, depending on the transceiver version or presetting.

By default, the Auto ACK function automatically sends an Acknowledgement to the calling

station. ( [MENU] > DSC Settings >

Auto ACK

(p. 36))

If Auto ACK is set to “Manual,” you can manually send an Acknowledgement for each call

as described in this section.

Receiving an Individual call

When an Individual call is received:

•An alarm sounds.

•

“RCVD INDIVIDUAL” is displayed.

1. Push

ALARM OFF

to turn OFF the alarm.

Push the Software Key below the next operation.

IGN

(Ignore)

Ignores the call and returns to the operating

screen.

•The call is saved in the DSC Log.

•“ ” blinks continuously until you display

the call message.

ABLE

( Able to

comply)

Sends an Individual Acknowledgement right

away.

•

Automatically switches to the assigned

channel.

•After sending, push

RESEND

to resend.

•The call is saved in the DSC Log.

ACPT

(Accept)

Accepts the call.

•The call is saved in the DSC Log.

•The received call’s information is

displayed.

•

Push the Software Key to select the

Acknowledgement option.

ABLE

(Able to Comply)

Sends an Acknowledgement without any changes.

UNABLE

(Unable to Comply)

Sends an Acknowledgement but cannot

communicate.

NEW CH

(Propose New CH)

Able to communicate but proposes another channel.

Specify the channel by pushing [▲] or [▼].

Содержание IC-M220



































































Результаты поиска

Содержание IC-M220

Отзывы:

Похожие инструкции для IC-M220

Бренды по названию

Популярные бренды

Icom IC-M220, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M220

Отзывы:

Похожие инструкции для IC-M220

Бренды по названию

Популярные бренды