Icom IC-M220 Скачать руководство пользователя страница 65

Страница: 65 / 66

A-1

APPENDIX

■

Making an Individual call using an AIS

transponder

When the optional MA-500TR

class

ais

transponder

is connected to your transceiver,

you can transmit an Individual DSC call to a selected AIS target, without entering the

target’s MMSI code. In this case, the call type is automatically set to “Routine.”

See page 45 for connecting instructions.

NOTE:

To ensure correct operation of the DSC function, make sure you correctly set

the CH70 SQL Level. (p.37)

1. Select an AIS target on the plotter, target list or danger list display.

You can also go to the next step whenever the detail screen of the AIS target is

displayed.

Confirm the transceiver is in the normal operating mode. Otherwise, you cannot make

an Individual DSC call using the transponder.

Push [DSC] to display the Voice channel selection screen, and then push [▲] or [▼]

to select a Voice channel.

Voice channels are already preset into the transponder in the recommended order.

When a coast station is selected in step 1, a Voice channel will be specified by the

coast station, therefore you cannot change the channel. The transponder will display

“Voice Channel is specified by the Base station,” in this case.

3. Push [DSC] to transmit an Individual DSC call to the AIS target.

•If Channel 70 is busy, the transceiver stands by until the channel becomes clear.

•If the transceiver cannot make the call, the transponder displays “DSC Transmission

FAILED.”

Содержание IC-M220



































































Результаты поиска

Содержание IC-M220

Отзывы:

Похожие инструкции для IC-M220

Бренды по названию

Популярные бренды

Icom IC-M220, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M220

Отзывы:

Похожие инструкции для IC-M220

Бренды по названию

Популярные бренды