DTMF tone sequences are used for autopatching, controlling
other equipment, etc. The transceiver has 16 DTMF memory
channels (d0–d#) for storage of often-used DTMF tone se-
quences of up to 24 digits.
q
Push and hold
[TONE•DTMF]
for 1 sec.
w
Rotate
[DIAL]
to select the
“
DTMF MEMORY,
”
then push
[MAIN•BAND].
e
Rotate
[DIAL]
to select the desired memory channel, then
push
[MAIN•BAND].
• A total of 16 channels, “d0” to “d#” are available.
r
Rotate the
[DIAL]
to select the desired code.
t
Push
[>](M/CALL•MW)
(Left band’s)
to select the next digit.
• Pushing
[<](V/MHz•SCAN)
(Left band’s) moves the cursor back-
ward.
y
Repeat the steps
r
and
t
to set the desired DTMF tone
sequence, then push
[MAIN•BAND]
.
u
Push
[BACK](V/MHz•SCAN)
(Right band’s)
twice to exit
from DTMF memory screen.
[EXAMPLE]:
Programming “5428AB453” into DTMF memory channel “d4.”
Push
Rotate
Push and hold for 1 sec.
TONE
DTMF
Rotate
Push
Push (Right band’s) twice to back.
Rotate then push (Left band’s)
M/CALL
MW
V/MHz
SCAN
>
BACK
Repeat the previous step until the
desired tone sequence is entered.
M
A
IN B A
N
D
M
A
IN B A
N
D
M
A
IN B A
N
D
M
A
IN B A
N
D
M
A
IN B A
N
D
Push
M
A
IN B A
N
D
81
DTMF MEMORY ENCODER
10
■
Programming a DTMF tone sequence
Содержание IC-E2820
