manualshive.com logo in svg

Icom IC-E2820, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-E2820 Скачать руководство пользователя страница 8

I

QUICK REFERENCE GUIDE

■

Installation

D

Precaution— magnets

R

CAUTION

Magnets are used for the controller’s attachment to the main
unit.

NEVER

hold the whole unit by the controller only when carry-

ing the transceiver. Carry the transceiver holding the main
unit. If held by the controller, the main unit may drop off and
may result in injury to the person carrying it or damage the
transceiver.

NEVER

attach the controller on the main unit’s top cover, par-

ticularly around the internal speaker grill. It may cause the
contents of the CPU and memory device could be deleted.

may cause the contents of the CPU and memory device
could be deleted.

NEVER

put the controller near a clock, television set 

(CRT

type)

, magnetic compass and any magnetic/IC cards, credit

cards, etc. It may cause the product to malfunction, and the
content of the magnetic card could be deleted.

Please note that the controller may drop off when a high im-
pact or vibration is applied.

D

Installation methods

• The supplied remote controller bracket and separation cable

can be used for installation.

• The optional MB-65 

MOUNTING BASE

must be used when in-

stalling into your vehicle.

• Optional OPC-440 

MICROPHONE CABLE

(5.0 m) is available

to extend the microphone cable.

• Optional OPC-441 

SPEAKER CABLE

(5.0 m) is available to ex-

tend the speaker cable.

Main unit

Controller

Содержание IC-E2820





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды