Icom IC-E2820 Скачать руководство пользователя страница 92

Страница: 92 / 164

CALL CHANNEL OPERATION

■

Call channel selection

Call channel is a pre-programmed memory channel that can
be accessed by simply pushing call channel button.

➥

Push the desired band’s

[M/CALL•MW]

several times to

select the call channel mode, then rotate the same band’s

[DIAL]

to select the desired call channel.

• “C0” or “C1” appears instead of memory channel number.
• Push the

[M/CALL•MW]

several times to select memory mode,

or push the same band’s

[V/MHz•SCAN]

to select VFO mode.

➥

Push and hold [MR/CALL] for 1 sec. to select
the call channel mode then push [

]/[

] to

select the desired call channel in the main
band.

• Push [MR/CALL] to select memory mode, or push

[VFO/LOCK] to select VFO mode.

■

Call channel copying

Call

➪

VFO/Memory

Push the desired band’s

[M/CALL•MW]

several times to

select call channel mode, then rotate the same band’s

[DIAL]

to select the desired call channel.

• “C0” or “C1” appears.

Push the same band’s

[M/CALL•MW]

for 1 sec., then ro-

tate the

[DIAL]

to select the memory channel to copy the

contents to.

• “

” indicator and memory channel number blink.

• To copy to the VFO mode, select “VFO” with the

[DIAL]

Push and hold the same band’s

[M/CALL•MW]

for 1 sec.

to copy the contents.

Push [MR/CALL] for 1 sec. then push [

]/[

]

to select the desired call channel in the main
band.

Push [FUNC], then [

CLR

A(MW)] for 1 sec. to

copy the contents.

• To copy to the VFO only.

MR/CALL

“C0” or “C1” appears

[DIAL]

[M/CALL•MW]

✔

INFORMATION

When the VFO mode is selected from
the call channel, a small “c” appears
instead of memory channel number.

Содержание IC-E2820





































































































































































Результаты поиска

Содержание IC-E2820

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-E2820, Инструкция по эксплуатации

Результаты поиска

Содержание IC-E2820

Отзывы:

Бренды по названию

Популярные бренды