Icom IC-E2820 Скачать руководство пользователя страница 115

Страница: 115 / 164

PAGER/CODE SQUELCH

• PERSONAL CALLS

This display appears when you are called with your ID code
and the calling station’s ID code is 444.

• GROUP CALLS

This display appears when you are called with the group code
(444), provided 444 has been programmed into code chan-
nel C3.

• ERROR INFORMATION

When the transceiver receives an incomplete code, “E” and
previously received code appear.

■

Code squelch

When using code squelch you will only receive calls from sta-
tions which know your ID or group code. A 3-digit code is sent
each time

[PTT]

is pushed in order to open the receiving sta-

tion’s code squelch prior to voice transmission.

Set the operating frequency.

• Set the volume and squelch to the desired level as in normal op-

eration.

Push

[

•

]

to display the function guide.

Push

[MENU](V/MHz•SCAN)

(Right band’s)

to enter the

MENU screen.

Rotate

[DIAL]

to select “DUP/TONE…” then push

[MAIN•BAND]

to enter DUP/TONE set mode.

Rotate

[DIAL]

to select the “PGR/C-SQL” then push

[MAIN•BAND]

Rotate

[DIAL]

to set “C-SQL” then push

[MAIN•BAND]

Rotate

[DIAL]

to select “PGR MEMORY” then push

[MAIN•BAND]

Rotate

[DIAL]

to select the desired transmit code channel:

➥

Rotate

[DIAL]

to select the desired code channel.

➥

Push

[BACK](V/MHz•SCAN)

(Right band’s)

three times

to return to frequency indication.

• “C-SQL.” appears.

Operate the transceiver in the normal way

(push

[PTT]

transmit; release

[PTT]

to receive)

To cancel the code squelch, enter “PGR/C-SQL” set item,
then rotate

[DIAL]

to select “OFF”

• “C-SQL” disappears.

Previously received code.

“E” (error) appears

Code channel

“PGR” blinks.

Содержание IC-E2820





































































































































































Результаты поиска

Содержание IC-E2820

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-E2820, Инструкция по эксплуатации

Результаты поиска

Содержание IC-E2820

Отзывы:

Бренды по названию

Популярные бренды