Icom IC-E2820, Инструкция по эксплуатации

Страница: 114 / 164

93
12
PAGER/CODE SQUELCH
■
Pager operation
D
Calling a specific station
q
Program the pager code channel in advance
(p. 92)
.
w
Set the operating frequency.
• Set the volume and squelch to the desired level as in normal op-
eration.
e
Push [
F
• ] to display the function guide.
r
Push
[MENU](V/MHz•SCAN) (Right band’s)
to enter the
MENU screen.
t
Rotate
[DIAL]
to select “DUP/TONE…” then push
[MAIN•BAND] to enter DUP/TONE set mode.
y
Rotate
[DIAL]
to select the “PGR/C-SQL” then push
[MAIN•BAND] .
u
Rotate
[DIAL]
to set “PGR” then push
[MAIN•BAND]
.
i
Select the desired 3-digit transmit code channel:
➥
Rotate
[DIAL]
to select “PGR MEMORY” then push
[MAIN•BAND] .
➥
Rotate
[DIAL]
to select the desired pager code chan-
nel.
➥
Push
[BACK](V/MHz•SCAN) (Right band’s)
three times
to return to frequency indication.
• “PGR” appears in normal frequency indication.
o
Push
[PTT]
to transmit the pager code.
!0
Wait for an answer back.
• When the transceiver receives an answer back code, the func-
tion display shows the other member’s ID or group code.
!1
After con fi rming a connection, perform the previous steps
e
to
u
and select the code squelch operation “C-SQL,”
or non-selective calling system, “OFF” in step
u
.
• Push [BACK](V/MHz•SCAN) (Right band‘s) twice to return to
frequency indication.
!2
Communicate with the other party as normal: push
[PTT]
to transmit; release to receive.
D
Waiting for a call from a specific station
q
Set the operating frequency.
w
Turn pager function ON.
• Perform the steps
e
to
u
in “ D Calling a speci fi c station” as at
left.
• “PGR” indication appear.
e
Wait for a call.
• When receiving a call, the caller’s ID or group code appears as
shown at next page.
r
Push
[PTT]
to send an answer-back call and display the
operating frequency.
t
After confirming a connection, select the code squelch
operation “C-SQL,” or non-selective calling system “OFF.”
Select “PGR”