Icom IC-E2820, Инструкция по эксплуатации

Страница: 147 / 164

126
15
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D D
RX GPS message indication
q
Enter MENU screen via function guide.
➥
Push
[
F
• ]
to display function guide.
➥
Push
[MENU](V/MHz•SCAN) (Right band’s)
to enter
MENU screen.
w
Rotate
[DIAL]
to select “DV GPS,” then push
[MAIN•BAND]
to enter DV GPS set mode.
e
Rotate
[DIAL]
to select “RX GPS MESSAGE,” then push
[MAIN•BAND]
to enter received GPS message.
r
Verify the received GPS message.
t
Push [
F
• ] once to return to frequency indication.
D D
Programming GPS memory
Each memory channel can be programmed with an alphanu-
meric channel name for easy recognition and can be dis-
played independently by channel. Names can be a maximum
of 8 characters— see the table on page 65 for available char-
acters.
q
Push
[GMR](TONE•DTMF)
to select GPS memory mode.
w
Rotate [DIAL] to select “ALL,” then push [MAIN•BAND] .
e
Rotate
[DIAL]
to select the desired GPS memory channel,
then push [MAIN•BAND] .
“NAME” : The GPS memory name
“TIME” : Time data
“LAT” : Latitude data
“LOT” : Longitude data
“BANK” : The memory bank
r
Push
[MAIN•BAND]
to enter memory programming mode.
• The cursor appears on the NAME’s fi rst character.
t
Rotate
[DIAL]
to select the desired character.
• Push [Aa](TONE•DTMF) to select the character group from cap-
ital letters or lower case letters.
• Push [1/](M/CALL•MW)
(Right band’s)
to select the character
group from numbers or symbols.
• Push [>](M/CALL•MW)
(Left band’s)
to move the cursor right;
push
[<](V/MHz•SCAN)
(Left band’s) to move the cursor left.
• Push
[CLR](DUP/MONI)
to clear the selected character.
• Push and hold
[CLR](DUP/MONI)
for 1 sec. to clear all charac-
ters after the selected character.
y
Push [MAIN•BAND] to set the channel.
• The cursor disappears.