![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_basic-manual_3602293078.webp)
5
D-STAR OPERATION <BASIC>
5-16
Using the “Your Call Sign”
D
The “Your Call Sign” memory stores the programmed
“UR” (destination) call sign.
When you select an individual station call sign for the
“TO” (Destination) setting using “Your Call Sign,” a gate-
way call can be made.
When you call the destination through a gateway, the
signal is automatically sent to the last repeater that the
station accessed.
So, even if you don't know where the station is, you can
make a call.
NOTE:
If the repeater, set to “FROM” (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
Example:
Select “TOM” from the “Your Call Sign.”
Push
q
DR
(
C
) to select the DR mode.
Check whether or not “TO” is selected.
w
• If “TO” is not selected, touch the “TO” field.
Touch the “TO” field.
e
• The “TO SELECT” screen appears.
Touch “Your Call Sign.”
r
• The “YOUR CALL SIGN” screen is displayed.
Touch the destination name or call sign.
t
• Example: “TOM”
• The transceiver returns to the DR mode screen, and
“TOM” is displayed in “TO.”
After selecting a destination, you can select another
station preset in your transceiver by rotating the Dial
or [M-CH] (
L
).
The name and call
sign of the selected
station is displayed.
“TOM” is set in “TO.”
Touch the
destination.
( Example:
“TOM”)
“TO” (Destination) setting (Continued)
“TO” is selected.
Touch
“TO.”
Touch
“Your Call Sign.”
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay