![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_basic-manual_3602293065.webp)
5
D-STAR OPERATION <BASIC>
5-3
D-STAR Operating procedures (Continued)
Making a Gateway call
D
Set “FROM” (Access repeater)
1.
Push
q
DR
(
C
) to select the DR mode.
Check whether or not “FROM” is selected.
w
• If “FROM” is not selected, touch the “FROM” field.
Touch the “FROM” field.
e
• The “FROM SELECT” screen appears.
Touch “Repeater List.”
r
• The “REPEATER GROUP” screen appears.
Touch the repeater group where your access repeat-
t
er is listed.
• Example: “11: Japan”
Touch your access repeater.
y
• Example: “Hirano”
• The transceiver returns to the DR mode screen, and the
selected repeater is set in “FROM.”
Set “TO” (Destination)
2.
Check whether or not “TO” is selected.
u
• If “TO” is not selected, touch the “TO” field.
Touch the “TO” field.
i
• The “TO SELECT” screen appears.
Touch “Gateway CQ.”
o
• The “REPEATER GROUP” screen appears.
!0
Touch the repeater group where your destination re-
peater is listed.
• Example: “11: Japan”
!1
Touch the destination repeater.
• Example: “Hamacho”
• The transceiver returns to the DR mode screen, and the
selected repeater is set in “TO.”
Hold down [PTT] to transmit
3.
• While holding down [PTT], the TX/RX indicator lights red.
“FROM” is selected.
“Hirano” is set
in “FROM.”
Touch
“FROM.”
Touch your ac-
cess repeater.
( Example:
“Hirano”)
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Touch
“Gateway CQ.”
Transmitting
Touch
“TO.”
“Hamacho” is
set in “TO.”
“TO” is selected.
Touch the re-
peater group
( Example:
“11: Japan”)
Touch the desti-
nation repeater.
( Example:
“Hamacho”)
Repeater area
(Sub name)
Repeater
call sign
See page 5-5 to check whether you can access the
repeater.
Convenient!
✓
The Gateway CQ call is used to call any repeater, but
you can call a specific station by simply saying their
call sign.