![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_basic-manual_3602293080.webp)
5
D-STAR OPERATION <BASIC>
5-18
Using the TX History
D
The TX History stores the name and/or call sign of up
to 20 “TO” (Destination) settings that were used when
you made the calls.
NOTE:
If you never transmit a call in the DV mode,
you cannot select “TO” (destination) from the TX His-
tory.
Example:
Select the “Dallas” repeater in the TX His-
tory.
Push
q
DR
(
C
) to select the DR mode.
Check whether or not “TO” is selected.
w
• If “TO” is not selected, touch the “TO” field.
Touch the “TO” field.
e
• The “TO SELECT” screen appears.
Touch [
r
Z
] to display the next page.
Touch “TX History.”
t
• The “TX HISTORY” screen appears.
Touch the destination name or call sign.
y
• Example: “Dallas”
• The transceiver returns to the DR mode screen, and “Dal
-
las” is displayed in “TO.”
“Dallas” repeater’s
call sign is displayed.
If you push
QUICK
(
C
) on the TX HISTORY screen,
you can add the selected TX HISTORY data to mem-
ory, or delete it from there.
“TO” (Destination) setting (Continued)
“Dallas” is set in “TO.”
“TO” is selected.
Touch
“TO.”
Touch
“TX History.”
Touch
[
Z
].
The Sub name is
displayed when
a repeater is se-
lected.
The
L
,
R
,
C
or
D
in the instructions indicate the
part of the controller.
L
: Left side,
R
: Right side,
C
: Center bottom
D
: Display (Touch screen)