Icom IC-7100, Основное руководство

Страница: 57 / 96

4-1
Section
4
D-STAR INTRODUCTION
IMPORTANT!
• The repeater list described in this manual may differ from your trans -
ceiver’s preloaded contents.
• Although Japanese repeaters are used in the setting examples, the
Japanese repeater node (port) letters are different from those in other
countries.
Be sure to add a repeater node letter as the 8th digit in the call sign
field after a repeater call sign according to the repeater frequency band
shown below.
1200 MHz: A (B in Japan)
430 MHz: B (A in Japan)
144 MHz: C (no D-STAR repeaters in Japan)
“MY” (Your own call sign) programming .............................4-2
D-STAR Introduction .............................................................4- 5
About the DR (D-STAR Repeater) mode ..............................4- 5
Communication Form in the DR mode ................................4- 6
‘FM’ means ‘Full Manual.’
‘sec.
MM ’ means section number.
So when ‘(FM sec. MM )’ is described on this manual, see the PDF type
Full Manual’s section number for your reference.
Section 1 PANEL DESCRIPTION
Section 2 INSTALLATION AND CONNECTIONS
Section 3 BASIC OPERATION
Section 4
D-STAR INTRODUCTION
Section 5 D-STAR OPERATION <BASIC>
Section 6 SET MODE
Section 7 CE