70
status of all active wireless stations that are
connecting to the access point.
MAC address
Input the MAC address of other wireless routers.
1 to 4 (6 - 9):
Security
Click to set security settings for this connection
Setting (10):
(Please go to section ‘2-7-3 Wireless Security’ for
detailed instructions).
2-7-1-6 Setup procedure for ‘Universal Repeater’
In this mode, the router can act as a wireless repeater; it can be Station and
AP at the same time. It can use Station function to connect to a Root AP and
use AP function to service all wireless stations within its coverage.
Here are descriptions of every setup items:
Band (2):
Select the band you want to use, all the wireless
routers must use the same setting.
1
2
3
4
5
7
6
NOTE: For Repeater Mode, this router will demodulate the received signal,
checking if this signal is noise for the operating network then have the signal
modulated and amplified again. The output power of this mode is the same as
that of WDS and normal AP mode.
Содержание NI-707538
