92
3-2 Network Address Translation (NAT)
Network address translations solve the problem if sharing a single IP
address to multiple computers. Without NAT, all computers must be assigned
with a valid Internet IP address to get connected to Internet, but Internet
service providers only provide very few IP addresses to every user. Therefore
it’s necessary to use NAT technology to share a single Internet IP address to
multiple computers on local network, so everyone can get connected to
Internet.
Please follow the following instructions to set NAT parameters:
3-2-1 Basic NAT Settings (Enable or disable NAT function)
Please click ‘NAT’ menu on the left of web management interface, and the
following message will be displayed on your web browser:
To enable NAT function, please select ‘Enable’ for ‘Enable NAT module
function’ (1); to disable, please select ‘Disable’.
After you made the selection, please click ‘Apply’ button (2) and the following
message will be displayed on your web browser:
1
2
Содержание NI-707538
