ICI I-CAM 380 Series Скачать руководство пользователя страница 83

Страница: 83 / 91

I-CAM 380/I-CAM 640 P-SERIES USER MANUAL

8-19-18 Synchronous Data

Enable SD card to synchronize with local data as follows:

Press the Menu button to open the main menu.

2. Press down on the Thumbstick until the General tab opens.

3. Press right on the Thumbstick to access sub-tabs.

4. Press down on the Thumbstick until Data Synchronization tab is highlighted.

5. Using the touchscreen, tap Data Synchronization sub-tab.

6. Tap Confirmed to perform synchronization the SD Card. Tap Cancel to

cancel synchronization.

7. Press the Back button exit the main menu.

8-19-19 Format the SD Card

Users can format the MircoSD card as follows:

Press the Menu button to open the main menu.

2. Press down on the Thumbstick until the General tab opens.

3. Press right on the Thumbstick to access sub-tabs.

4. Press down on the Thumbstick until Format SD Card tab is highlighted.

5. Using the touchscreen, tap Format SD Card sub-tab.

6. Tap Confirmed to format the SD Card. Tap Cancel to cancel formating.

7. Press the Back button exit the main menu.

SYNCHRONIZING THE SD CARD TO THE INTERNAL STORAGE WILL ERASE

ANY AND ALL IMAGES SAVED TO THE MEMORY CARD AS WELL AS THE

INTERNAL STORAGE. SYNCHRONIZATION CANNOT BE UNDONE. BE SURE TO

BACK UP AS NEEDED BEFORE FORMATTING.

FORMATTING THE SD CARD WILL ERASE ANY AND ALL IMAGES SAVED TO

THE MEMORY CARD. FORMATTING THE SD CARD WILL NOT ERASE IMAGES

SAVED TO THE INTERNAL STORAGE. BE SURE TO BACK UP AS NEEDED

BEFORE FORMATTING.

Содержание I-CAM 380 Series




























































































Результаты поиска

Содержание I-CAM 380 Series

Отзывы:

Похожие инструкции для I-CAM 380 Series

Бренды по названию

Популярные бренды

ICI I-CAM 380 Series, Руководство пользователя

Результаты поиска

Содержание I-CAM 380 Series

Отзывы:

Похожие инструкции для I-CAM 380 Series

Бренды по названию

Популярные бренды