I-CAM 380/I-CAM 640 P-SERIES USER MANUAL
37
8-11-3-1 Manually Saving Media
Manually save an image as follows:
1.
After enabling confirmed saving,
capture an image. An indicator will appear
on the screen to let the user know capture is in progress.
2. Using the touchscreen, tap the arrow icon in the lower left corner. Review
Screen will open. Perform thermal analysis if preferred.
3. Press the Back button. A prompt appears.
4. Tap Confirmed to save the image. Press the Back button to return to the
Review Screen and continue editing the image. Tapping Cancel on the
touchscreen will exit the Review Area and discard changes unsaved. Menu
closes automatically when saving or discarding is complete.
2.
8-12 Panoramic Imaging
Users may capture a series of images to stitch into one panoramic image. This
function requires the ThermoTools analysis software.
8-12-1 Enable Panoramic Imaging
Capture a series of images for panoramic stitching as follows:
1.
Using the touchscreen, tap-and-drag upwards on the Quick Access Menu
bar located at the bottom of the screen. Quick Access Menu opens.
2. Tap the Panorama button. Feature highlights blue when enabled. Menu
closes automatically
.
3. Follow the prompts shown on the screen to capture up to 9 images.
4. When user is finished capturing images, tap the check mark located next
to the Level & Span Bar to the middle right of the screen. Media will be
saved to the gallery and can be stitched together on a computer using the
ThermoTools Analysis Software.
THE PANORAMA FEATURE REQUIRES THE THERMOTOOLS ANALYSIS
SOFTWARE TO PERFORM PANORAMIC STITCHING.
