ICI I-CAM 380 Series Скачать руководство пользователя страница 68

Страница: 68 / 91

I-CAM 380/I-CAM 640 P-SERIES USER MANUAL

GLOBAL PREFERENCES ARE USEFUL IN CONTROLLED ENVIRONMENTS

WHERE ATMOSPHERIC VARIABLES ARE EXPECTED TO REMAIN STABLE.

USERS CAN DEFINE EXCEPTIONS EITHER BEFORE IMAGES ARE CAPTURED

BY VISITING THE TOOLS MENU OR AFTER IMAGES ARE CAPTURED BY

VISITING THE EDIT SECTION OF REVIEW AREA.

8-19-3 Global Thermography Preference Settings

The device has predefined set of global thermography parameters for image

polarity (color palette), emissivity, reflected ambient temperature, humidity,

atmospheric temperature, and optical transmission. These global settings are

useful for inspections in controlled environments where atmospheric variable

remain stable.

Users cannot change the global thermography parameters; however, they can

change the thermography parameters for individual images during or after

capture (see

Section

8-15-4 Thermography Settings

8-19-3-1 Create New Preference Settings

Users can create new global thermography settings as follows:

Press the Menu button to open the main menu.

2. Press down on the Thumbstick until the Preference Settings (abbreviated

Pref Setting) tab opens.

3. Using the touchscreen, tap New Preference sub-tab.

4. Tap the input box next to Name. Keyboard appears.

5. Use the keyboard by tapping the touchscreen to input preferred text.

6. Tap Done. Keyboard closes and name is saved automatically.

7. Define remaining parameters as follows:

•

Tap on a parameter. A rotary menu appears.

•

Press up or down on the Thumbstick to define the parameter.

•

Press the Back button to save and exit the rotary menu.

8. Repeat Step 6 for each parameter.

9. Tap Done after defining the global preferences. Sub-tab will close. Settings

are saved automatically under a new heading titled My Preferences. Tap

Cancel to cancel preferences creation.

10. Tap the preferred preferences to enable the settings. Settings are enabled

when the check mark turns blue. To reset the device to the original global

preferences, toggle the Default Preferences (abbreviated Default Pref)

setting to the On position by tapping the switch or perform a factory reset.

11. Press the Back button to save and exit the main menu.

Содержание I-CAM 380 Series




























































































Результаты поиска

Содержание I-CAM 380 Series

Отзывы:

Похожие инструкции для I-CAM 380 Series

Бренды по названию

Популярные бренды

ICI I-CAM 380 Series, Руководство пользователя

Результаты поиска

Содержание I-CAM 380 Series

Отзывы:

Похожие инструкции для I-CAM 380 Series

Бренды по названию

Популярные бренды