ICE RS26, powered by Brain OS | Gen2, v1.1217 – Content Subject to Change
Brain Corporation
39
BEST PRACTICES
TIPS FOR SUCCESSFUL OPERATION
To ensure successful operation it is important to adhere to the following recommendations for optimal performance.
ESTABLISH PERMANENT HOME LOCATION(S)
Home Location Markers must be in the exact same location each time your Brain-enabled scrubber is used.
• Markers must be fixed to a wall or flat surface 40 inches from the ground.
• Markers should be placed in a well-lit area.
A flashlight may be used in a lights-out building.
• Markers should never be photocopied, laminated, or placed in a sleeve or cover.
Doing so may prevent your robotic scrubber from being able to read the marker.
INSPECT & MAINTAIN THE MACHINE
Ensure optimal performance by performing the following maintenance steps.
Visually inspeCt sensors Before use & Wipe if neCessary:
• Dirty sensors can affect the machine’s performance. Inspect the 3D sensor and the upper and lower LIDAR
sensors to ensure they are clean and free of smudges. Clean any dirt and dust off using the microfiber cloth
provided. Do not apply water to the sensors OR cloth!
inspeCt pads, Brushes & squeegees:
• As brushes wear down, the scrub deck gets lower. Ensure the side squeegees are adjusted properly and raise
them as the brushes wear down.
• Replace worn brushes and pads.
• Inspect rear squeegee for wear and flip or replace if necessary.
ensure Battery health
• Check charger lights before each use. A solid green light indicates a successful charge.
• Regularly check the battery water level and top off with distilled water if necessary.
RUNNING A ROUTE
Remember these tips each time you use your robotic scrubber
stay Clear of the front of the MaChine and sensors
• Do not crowd or stand in front of the machine especially while choosing routes at the home location.
• Keep people behind the machine.
pair your phone
• Remember to pair your phone to receive alerts from your robotic scrubber.
optiMize poWer usage
• For daily floor maintenance, use lower water and pressure settings for longer battery life.
don’t park too Close to the hoMe Marker
• Being too close or too far from the marker may prevent your robotic scrubber from seeing the marker.
