ICE RS26, powered by Brain OS
|
Gen2, v1.1217 – Content Subject to Change
Brain Corporation
17
WARNING
Do not put any flammable materials into solution tank.
This can cause an explosion or fire.
NOTE:
Before accessing the bucket fill-port make sure that the recovery tank is empty. When filling the solution
tank with a bucket, make sure that the bucket is clean. Do not use the same bucket for filling and draining the
machine. The Brain-enabled scrubber must not be in autonomous mode. In addition, check to ensure that all
machine parts are raised off the floor.
FILLING THE DETERGENT BOTTLE
The Brain-enabled scrubber is equipped with a six-liter detergent bottle (Machine Components #20)
NOTE:
Only use recommended cleaning chemicals. Contact your janitorial supply
distributor for recommendations regarding proper chemicals.
CAUTION
– Before using any cleaning chemicals:
• The Safety Data Sheet (SDS) for the chemical shall be reviewed by the worker and the employer.
• Instructions and precautions noted in the SDS and on the container shall be followed.
• Employers must provide cleaning chemical safety training to workers at a level and in a language and
vocabulary that the workers can understand.
FILLING THE SOLUTION TANK
The Brain-enabled scrubber is equipped with a hose to fi ll
clean water port (Machine Components #2) at the side of the
machine, and a bucket fi ll-port located under recovery tank.
1. Open the cap (Machine Components #24).
2. Fill detergent and observe the liquid level on the detergent
level watching window (Machine Components #14).
3. The ratio of water and detergent is 0~5%.
This ratio can be adjusted by pressing the detergent
level buttons (Machine Components #36).
