ICE RS26, powered by Brain OS
|
Gen2, v1.1217 – Content Subject to Change
26
Brain Corporation
MANUAL MODE
Start-Up
The steps below should be followed to begin operating the machine. Note, the Brain-enabled scrubber must be
fully charged before use.
2. While sitting in the
operator seat, turn the
momentary
key/ignition clockwise to
initiate power and wait
for the screen to display
“Choose Route, Teach
Route and Service.”
4. To begin driving, press
propel (accelerator) pedal.
Speed can be adjusted by
the force applied to the
pedal - light is slow, heavy
is fast, before driving the
Brain-enabled scrubber
3. The machine is able to
operate in forward or
reverse. Use directional
switch to select
desired direction.
5. If manual cleaning is to
be conducted, select
desired cleaning settings
using the scrubber depth
indicator, detergent
level indicator and
water level indicator
adjustment buttons.
6. The machine may now be driven
manually to conduct cleaning.
7. When driving the machine, it is important
to maintain a safe distance from the edge
of ramps, platforms and other objects.
8. Go slow on inclines and slippery surfaces.
9. Drive the Brain-enabled scrubber in as
straight a path as possible. Avoid turning
the steering wheel too sharply when the
machine is in motion. It is also important to
avoid sudden turns, except in emergencies.
10. Be very careful when operating
the machine in reverse.
11. Follow all safety guidelines.
12. Report any damage to machine
prior to operating it.
13. Failure to follow these instructions
and warnings may result in damage
to the machine or injury.
1. Disconnect the machine from the power outlet.
