ICE RS26, powered by Brain OS
|
Gen2, v1.1217 – Content Subject to Change
Brain Corporation
25
PRE-OPERATION CHECKS
Before operating in either manual or autonomous mode, the following checks must be conducted.
1. Check the tank cover seals for damage.
2. Check and drain the recovery tank, check the vacuum fan inlet fi lter, clean them if necessary.
3. Check the vacuum hose for debris or blockage. Check the squeegees
for damage, wear and for defl ection adjustment.
4. Check whether the pad/brush is installed properly. Check the brakes and steering for proper operation.
5. Check that the rear squeegee and side skirts are free of tears, rips and
excessive wear and are picking up water properly.
6. Check the water, solution and scrub deck pressure levels are to the desired
need for the route. Adjust as needed for each route.
