Innovative Controls, Inc
Fire Pressure Governor User Manual
3050621, 3050622, 3050623, 3050624
Innovative Controls, Inc.
560 Braddock Avenue
East Pittsburgh, PA 15112
Page 8 of 32
Rev 1.10
1.3.2 Engine Speed Display
The Engine Speed Display shows the engine speed in revolutions per
minute (RPM).
1.3.3 Pump Discharge Pressure Display
The Pump Discharge Pressure Display shows the pump pressure in
PSI, kPa, MPa, or bar as measured by the discharge sensor.
1.3.4 Throttle Ready Indicator
The Throttle Ready Indicator shows the status of the Throttle Ready interlock input. This
indicator is green when the Throttle Ready input is active.
1.3.5 OK To Pump Indicator
The OK To Pump Indicator shows the status of the OK To Pump interlock input. This
indicator is green when both the Throttle Ready and Pump Engaged inputs are active, or
when the OK 2 Pump input is active and the configuration parameter is set to OK2PUMP.
1.3.6 Engine Coolant Temperature Indicator
The Engine Coolant Temperature Indicator changes color to show the state of the engine
temperature. Green indicates normal temperature, yellow when the temperature is in the
warning range, and red when the temperature is critically high. The engine coolant
temperature indicator can be configured to operate from standard J1939 diagnostic
message failure mode identifiers or from user defined setpoints.
1.3.7 Engine Oil Pressure Indicator
The Engine Oil Pressure Indicator changes color to show the state of the engine oil
pressure. Green indicates normal oil pressure, yellow when the oil pressure is in the
warning range, and red when the oil pressure is critically low. The engine oil pressure
indicator can be configured to operate from standard J1939 diagnostic message failure
mode identifiers or from user defined setpoints.
