IBM TotalStorage Ultrium T800, Руководство оператора

Страница: 128 / 148

Table 17. Supported TapeAlert Flags (continued)
Flag
Number
Flag
Parameter
(in hex)
Flag Description Action Required
12 0Ch Unsupported format Set when you load an
unsupported cartridge type into
the drive or when the cartridge
format has been corrupted.
Use a supported tape cartridge.
15 0Fh Cartridge memory
chip failure
Set when a cartridge memory
(CM) failure is detected on the
loaded tape cartridge.
Replace the cartridge. If this
error occurs on multiple tapes,
see error code 6 in Table 15 on
page 75.
16 10h Forced eject Set when you manually unload
the tape cartridge while the
drive was reading or writing.
No action required.
18 12h Tape directory
corrupted in the
cartridge memory
Set when the drive detects that
the tape directory in the
cartridge memory has been
corrupted.
Re-read all data from the tape to
rebuild the tape directory.
20 14h Clean now Set when the drive detects that it
needs cleaning.
Clean the drive. See “Cleaning
the Drive Head” on page 31.
21 15h Clean periodic Set when the drive detects that it
needs routine cleaning.
Clean the tape drive as soon as
possible. The drive can continue
to operate, but you should clean
the drive soon. See “Cleaning
the Drive Head” on page 31.
22 16h Expired clean Set when the drive detects a
cleaning cartridge that has
expired.
Replace the cleaning cartridge.
23 17h Invalid cleaning tape Set when the drive expects a
cleaning cartridge and the
loaded cartridge is not a
cleaning cartridge.
Use a valid cleaning cartridge.
30 1Eh Hardware A Set when a hardware failure
occurs which requires that you
reset the drive to recover.
If resetting the drive does not
recover the error, use the error
code from the single-character
display, library user interface, or
SCSI drive sense data. See
Table 15 on page 75.
31 1Fh Hardware B Set when the drive fails its
internal self tests.
Use the error code on the
single-character display, library
user interface, or SCSI drive
sense data. See Table 15 on page
75.
32 20h Interface Set when the drive detects a
problem with the SCSI or LDI
(RS-422) interface.
Locate error code 8 or 9 in
Table 15 on page 75.
33 21h Eject media Set when a failure occurs that
requires you to unload the
cartridge from the drive.
Unload and reload the tape
cartridge.
34 22h Download fail Set when an FMR image is
unsuccessfully downloaded to
the drive via the SCSI interface.
Ensure that it is the correct
image. Download the FMR
image again.
112
IBM TotalStorage Ultrium Tape Drive