IBM TotalStorage Ultrium T800, Руководство оператора

Страница: 101 / 148

To determine where to send a file that contains a drive dump to be analyzed,
contact your OEM Product Application Engineer (PAE).
Viewing the Drive Error Log
The drive keeps an error log that you can use to identify and correct errors. The
log contains the 10 most recent error codes, which appear (one at a time) on the
Single-character Display (SCD).
To view the drive error log:
1. Make sure that no cartridge is in the drive.
2.
Within two seconds, press the Unload Button three times. The Status Light
becomes solid amber, which means that the drive is in maintenance mode.
3. Press the Unload Button once per second until
9
appears in the SCD.
4. Press and hold the Unload Button for three seconds to view the most recent
error code.
5. Refer to Table 15 on page 75 to determine the meaning of the code and the
action to take.
6. Press the Unload Button to view the next error code. (The codes are ordered;
the most recent is presented first and the oldest (tenth) is presented last.)
7. Continue to press the Unload Button until the ten error codes have been
displayed. After you display the tenth error code, the drive automatically exits
maintenance mode.
To redisplay the error codes, repeat steps 1 through 7.
Resolving Problems
85