IBM TotalStorage Ultrium T800, Руководство оператора

Страница: 116 / 148

__ Step 4. As the LBA is secured in the cartridge, you should hear the LBA
retention spring clips click into place. If you do not hear the click,
continue rolling until the threader motor worm gear (
4
in Figure 32
on page 99) stops. The LBA is in the correct position.
Note: Be sure to keep tension on the tape as the LBA is drawn into
the cartridge by using a hex wrench as shown in Figure 31 on
page 98.
__ Step 5. Notice the following:
a. Loader mechanism gear (
8
in Figure 32 on page 99) nearest the
front of the drive that actuates the cartridge loader mechanism
b.
Position of the rotator stub (
3
in Figure 32 on page 99).
c. Front loader motor worm gear (
1
in Figure 32 on page 99).
Rotating this gear allows the loader mechanism gear (
8
in
Figure 32 on page 99) to turn.
__ Step 6. Rotate the loader motor worm gear (
1
in Figure 32 on page 99) to
turn the loader mechanism gear (
6
in Figure 32 on page 99)
counterclockwise. Continue turning until the rotator stub (
3
in
Figure 32 on page 99) loses contact with the lever (
7
in Figure 32 on
page 99). This releases the LBA leader pin.
__ Step 7. Rotate the threader motor worm gear (
4
in Figure 32 on page 99) to
turn the threader mechanism gear (
6
in Figure 32 on page 99)
counterclockwise. This moves the LBA out of the cartridge and past
the read/write head. Stop this rotation when the LBA is near the tape
guide roller nearest the rear of the drive (
1
in Figure 33).
__ Step 8.
Continue rotating the loader motor worm gear (
1
in Figure 32 on
page 99) until the rotate stub (
3
in Figure 32 on page 99) is
positioned as shown. Notice that the rotator stub (
3
in Figure 32 on
page 99) is nearly aligned with the cartridge loader tray guide bearing
(
2
in Figure 32 on page 99).
__ Step 9.
Remove the cartridge from the cartridge loader tray.
__ Step 10. Reassemble the drive by reversing the procedure in Step 4 on page 96
in Beginning Procedure.
__ Step 11. Refer to the appropriate procedure to install the new drive and return
the failed drive.
a82ru010
1
Figure 33. Leader Block Assembly (LBA)
100
IBM TotalStorage Ultrium Tape Drive