IBM TotalStorage FAStT FC2-133, Инструкция по установке и эксплуатации

Страница: 40 / 64

If you still have a system configuration problem, refer to the documentation that
comes with your server, or contact your IBM technical-support representative to
determine if your system board requires special configuration.
Fibre Channel problems
To determine if your installation problem is caused by an attached Fibre Channel
device, perform the following tasks:
v
Verify that all of the Fibre Channel devices were turned on before you turned on
the server.
v
Ensure that all cables are connected properly.
v
Verify that you configured your RAID storage subsystems using the utilities
provided by the manufacturer.
v
If your Fibre Channel switch supports zoning, make sure that your peripheral
device is configured to the same switch zone as the FAStT FC2-133 Adapter. For
more information, refer to your Fibre Channel switch documentation.
26
IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide