IBM TotalStorage FAStT FC2-133, Инструкция по установке и эксплуатации

Страница: 29 / 64

Using the flasutil BIOS Update Utility menu (from the diskette)
Complete the following steps to update your FAStT FC2-133 Adapter BIOS code
and NVRAM using the flasutil BIOS Update Utility:
1. Insert the BIOS Update Utility diskette into the diskette drive and restart the
server. Your server starts to a DOS prompt:
2. From the DOS prompt, type:
flasutil
3. Press Enter.
4. If you have only one adapter installed, go to step 5. If you have more than one
adapter installed, a list of adapters and I/O addresses displays. At the
command prompt, type the appropriate I/O address and press Enter.
5. The following option menu displays.
F = Write Flash
W = Copy Flash to file: QLxxROM.SAV
S = Display serial number
V = Display current BIOS version
C = Verify Flash
Y = Display port name
L = Write NOVRAM
A = Write NOVRAM and defaults
D = Copy NOVRAM to file:QLxxNVRM.SAV
U = Update BIOS NOVRAM defaults
X = Verify NOVRAM
Notes:
a. All of the listed options are supported and you can run them from the
command line. Options L, A, D, U, and X might not display.
b. You can configure each adapter with more than one option.
6. Type the letter for the option you want and press Enter.
7. If you have additional adapters installed or if you want to configure your
adapter with more than one option, continue with step 8. Otherwise, go to step
9.
8. Repeat steps 2 through 6 for each additional adapter or if you want to
configure your adapter with more than one option.
9. Remove the CD from the CD-ROM drive and restart the server.
10. Go to “Installing the FAStT FC2-133 Adapter device drivers” on page 16.
Chapter 2. Updating the FAStT FC2-133 Adapter BIOS code and installing device drivers
15