IBM TotalStorage FAStT FC2-133, Инструкция по установке и эксплуатации

Страница: 16 / 64

FAStT FC2-133 Adapter features
The FAStT FC2-133 Adapter has the following features:
v
Compliance with Intel
®
PCI Local Bus version 2.2 specification
v
Compliance with peripheral component interconnect-extended (PCI-X)
addendum, revision 1.0 to the Intel PCI Local Bus version 2.2 specification
v
Compliance with Third Generation Fibre Channel Physical and Signaling
Interface (PC-PH-3), revision 9.2
v
Compliance with Fibre Channel Arbitrated Loop (FC-AL-2) standard
v
Compliance with U.S. and international safety and emissions standards
v
Support for direct memory access (DMA)
v
Support for bus master
v
Fast!UTIL basic input/output system (BIOS) utility program to customize the
configuration parameters on the FAStT FC2-133 Adapter and attached drives
v
Support for Fibre Channel protocol SCSI (FCP-SCSI) and Fibre Channel Internet
protocol (FCP-IP)
v
Support for point-to-point fabric connection (F-PORT FABRIC LOGIN)
v
Support for Fibre Channel service (Classes 2 and 3)
Preinstallation procedures
Before you begin the FAStT FC2-133 Adapter installation, do the following:
v
Read “Handling static-sensitive devices” on page 3.
v
Read “What you need for the installation” on page 4.
v
Write down the serial number of the FAStT FC2-133 Adapter. Each adapter has a
unique serial number. If the nonvolatile random access memory (NVRAM) (also
referred to as NOVRAM) is damaged, the system prompts you for the FAStT
FC2-133 Adapter serial number. Figure 1 on page 3 shows the serial number
label location.
2
IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide