IBM TotalStorage FAStT FC2-133, Инструкция по установке и эксплуатации

Страница: 23 / 64

Chapter 2. Updating the FAStT FC2-133 Adapter BIOS code
and installing device drivers
After you install your FAStT FC2-133 Adapter, you must update the adapter BIOS
code, nonvolatile random access memory, and install the adapter device drivers.
To update the adapter BIOS code, you can use the BIOS Update Utility on the
Support CD that comes with the adapter or you can create and use a BIOS Update
Utility diskette. To install the adapter device drivers, see “Installing the FAStT
FC2-133 Adapter device drivers” on page 16.
Note: For the latest information about supported operating systems, versions of
device drivers, utilities, and documentation, go to
http://www.ibm.com/pc/support/.
Updating the FAStT FC2-133 Adapter BIOS code from the Support CD
To update the FAStT FC2-133 Adapter BIOS code and NVRAM using the BIOS
Update Utility on the Support CD, choose one of the following methods:
v
flasutil command prompt. Use this method to type in command-line options.
v
flasutil BIOS Update Utility menu. Use this method to select a command-line
option from the menu.
Using the flasutil command prompt (from the Support CD)
Complete the following steps to update your FAStT FC2-133 Adapter BIOS code
and NVRAM:
1. Insert the IBM TotalStorage FAStT FC2-133 Host Bus Adapter Support CD into
the CD-ROM drive. Restart the server. Your server starts to a DOS prompt.
2. To update the BIOS code in the flash utility, do the following:
From the DOS prompt, type:
flasutil /f
3. Press Enter.
4. To update the NVRAM, do the following:
From the DOS prompt, type:
flasutil /l
5. Press Enter.
6. To update the standard BIOS defaults in the flash utility to the new defaults
from the NVRAM files, do the following:
At the DOS prompt, type:
flasutil /u
7. Press Enter.
8. To review additional command-line options that you can use, go to
“Command-line options”; then, return to step 9.
9. Remove the CD from the CD-ROM drive and restart the server.
10. Go to “Installing the FAStT FC2-133 Adapter device drivers” on page 16.
Command-line options
This section describes additional command-line options that you can use. Complete
the following steps to review these command-line options:
© Copyright IBM Corp. 2002
9