IBM TotalStorage 2109 M12, Инструкция по установке и обслуживанию

Страница: 43 / 159

Note: Cables are keyed so that you can only insert them with the correct
orientation. If a cable does not slide in easily, ensure that it is
correctly oriented.
c. Repeat step 11a on page 12 and step 11b on page 12 for the remaining
ports.
d. Organize the cables as required.
12. Check the M12 switch and port status. Type the following command at the
Telnet prompt:
switchShow
This command provides detailed information about the switch.
13. Check the fabric for ISLs, switch names, or other status. Type the following
command at the Telnet prompt:
fabricShow
This command provides general information about the fabric.
14. After all zoning configurations and other changes are complete, back up the
configuration. Type the following command at the Telnet prompt:
configUpload
This command uploads the switch configuration to the server, so that it is
available for downloading to a replacement switch if necessary.
Note: You should routinely back up the configuration.
Chapter 2. Starting and configuring the M12
13