IBM Tape Library Magstar 3494, Руководство оператора

Страница: 177 / 378

Change system administrator password
Display a pop-up window that allows the user to change the system
administrator’s password. (See “System Administrator Password” on
page 200.)
Service Access
Allows for selection of the following:
Enable service access
Provides the ability to access the library managers through a modem
connection when installed. (See “Service Access” on page 208.)
Disable service access
Prevents the ability to access the library managers through a modem
connection if installed. (See “Service Access” on page 208.)
SNMP Options
Allows for selection of the following:
Start SNMP
Provides the ability to start the SNMP messaging process. (See “SNMP
Options” on page 208.)
Stop SNMP
Provides the ability to stop the SNMP messaging process. (See “SNMP
Options” on page 208.)
Change SNMP trap destinations
Provides the ability to add and delete the SNMP trap destinations for SNMP
trap messages. (See “SNMP Options” on page 208.)
Select SNMP trap types
Provides the ability to select the SNMP trap type of messages to be sent to
an SNMP monitoring station. (See “SNMP Options” on page 208.)
Send TESTM trap
Provides the ability to send test messages to SNMP monitoring stations.
(See “SNMP Options” on page 208.)
Schedule Cleaning
From the Commands pull-down, the operator can schedule automatic cleaning of
the tape drives based on time or usage. Also, the 3490E/3590control units can
request a cleaning based on tape drive performance.
3490E or 3590 Device Cleaning
Device cleaning in the library is managed by the library manager. During installation
of the 3494 and at any other time, a cleaning schedule can be established by
selecting the Commands pull-down from the Operator menu, and then selecting the
Schedule Cleaning item. An operator can then specify one of the following cleaning
schedules:
Time of Week
The tape subsystem drives are cleaned at specific times and days during a
week. This sets up a cleaning based on time.
Chapter 6. Advanced Operating Procedures
155