IBM Tape Library Magstar 3494, Руководство оператора

Страница: 175 / 378

(See “Volser Range for Media Types” on page 161.) Volser Ranges
are used only for physical volumes.
Insert VTS logical volumes
This panel allows the insert of logical volumes into a VTS library.
(See “Insert VTS Logical Volumes” on page 163.)
Eject a VTS stacked volume
This panel allows a VTS stacked volume to be ejected from the
library. (See “Eject a VTS Stacked Volume” on page 165.)
Set VTS category attributes
This panel allows the setting of a category to a “Fast Ready”
category. (See “Set VTS Category Attributes” on page 166.)
Set VTS management policies
This panel allows the entry of the “Inhibit Reclaim Schedule”, “Free
Storage Alarm Threshold”, and “Reclaim Threshold”. (See “Set VTS
Management Policies” on page 167.)
Manage Unassigned Volumes
This panel allows the operator to move physical volumes (J-type,
HPCT) in the Unassigned category to the Import category, Insert
category, or to eject the volumes. (See “Manage Unassigned
Volumes” on page 202.)
Manage Import Volumes
This panel allows the operator to move physical volumes (J-type,
HPCT) in the Import category to the Insert category, or if desired,
eject the volumes from the library. See “Manage Import Volumes”
on page 204.)
Manage Insert Volumes
This panel allows the operator to re-evaluate the physical volumes
in the Insert category for 3590 native use or eject the volumes from
the library. (See “Manage Insert Volumes” on page 205.)
Manage Export-Hold Volumes
This panel allows the operator to move Exported Stacked Volumes
in the Export-hold category to the Import category or eject the
Exported Stacked Volumes from the library. (See “Manage
Export-Hold Volumes” on page 206.)
Cancel Export/Import
This panel allows the operator to send a cancel request for an
in-progress Import or Export operation. (See “Cancel Export/Import”
on page 207.)
Inventory
Allows the selection of the following:
Inventory new storage
Start an inventory of any storage components that were not
inventoried previously. (See “Inventory New Storage or Re-inventory
Complete System” on page 169.) This is typically a system
administrator password-protected function.
Re-inventory complete system
Inventory all storage components. (See “Inventory New Storage or
Re-inventory Complete System” on page 169.) This is typically a
system administrator password-protected function.
Chapter 6. Advanced Operating Procedures
153
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|