IBM Tape Library Magstar 3494, Руководство оператора, Страница: 271 / 378

Sending the Ctrl+Esc Command to the Library Manager
To send the Ctrl+Esc command to the library manager during an active session, do
the following:
v
Choose Send Ctrl+Esc from the Keystrokes pull-down on the remote library
manager console session window (see Figure 159 on page 247).
v
Press the Ctrl+C shortcut key if the remote library manager console is in
keystrokes local mode.
Sending the Ctrl+Esc command lets you display the task list on the library manager.
After you display the task list, you can choose a task from the list.
Changing the Session State from the Remote Library Manager Console
The session state is the current state of the session between the remote library
manager console and the library manager workstations. Both workstation users can
change the session. While the remote library manager console is changing the
session state, the library manager cannot alter that session. If both users try to
change the state at the same time, the library manager takes precedence.
A status indicator of the session appears in the title bar of the session window or,
when the session interface is minimized, under the remote library manager console
icon.
Figure 160 on page 250 shows the remote library manager console window in the
library manager’s display during an active session. The remote library manager
console is in keystrokes remote mode.
Chapter 7. Remote Library Manager Console Feature
249