IBM SAN384B-2, Инструкция по установке, обслуживанию и эксплуатации

Страница: 87 / 190

The following sections provide information on how to determine the status of
different chassis components by viewing the LEDs or by entering commands.
v
“Port, application, or encryption blade status”
v “Control processor blade (CP8) status” on page 59
v
“Core switch blade (CR16-4) status” on page 61
v “Power supply status” on page 63
v
“Blower assembly status” on page 63
v “WWN card status” on page 65
Port, application, or encryption blade status
To determine the status of a port or application blade:
1.
Check the LEDs on the blade. The illustrations show the blades oriented
horizontally, as they are installed in the SAN384B-2 chassis.
v Figure 19 illustrates the FC16-32 port blade
v
Figure 20 on page 56 illustrates the FC16-48 port blade
v Figure 21 on page 56 illustrates the FC8-32E port blade
v
Figure 22 on page 56 illustrates the FC8-48E port blade
v Figure 23 on page 57 illustrates the FC8-64 port blade
v
Figure 24 on page 57 illustrates the FS8-18 encryption blade
v
Figure 25 on page 58 illustrates the FX8-24 extension blade
The LED patterns may temporarily change during POST and other diagnostic
tests. For information about how to interpret the LED patterns, see Table 8 on
page 58.
2. Check the blade status by typing slotShow .
Table 8 on page 58 describes the port blade LED patterns and the
recommended actions for those patterns.
1
Status LED
3
Fibre Channel port
2
Power LED
4
Port status LED
1
3
4
2
384b073
Figure 19. FC16-32 port blade
Chapter 4. Monitoring system components
55
|
|