IBM RS6000 - 7026 - H70 Скачать руководство пользователя страница 45

Страница: 45 / 358

Step 1520-4

1. Turn the power off.

2. Unplug the system unit power cable from the wall outlet.

3. Record the slot numbers of all the ISA and PCI adapters. Label and record the

location of any cables attached to the adapters. Remove all the adapters.

4. Remove all installed memory cards.

5. Remove the CPU card(s).

6. Unplug the power cables from all the SCSI devices.

7. Unplug all the fans, except the fan in the power supply.

8. Connect the system unit power cable to the wall outlet.

9. Turn the power on.

Does the fan in the power supply turn on and the power LED come on and stay
on?

Replace the I/O planar. Go to "MAP 410: Repair Checkout" in the

IBM

RS/6000 Diagnostic Information for Multiple Bus Systems.

YES

Go to “Step 1520-5” on page 2-16.

Chapter 2. Maintenance Analysis Procedures

2-15

Содержание RS6000 - 7026 - H70







































































































































































































































































































































































Результаты поиска

Содержание RS6000 - 7026 - H70

Отзывы:

Похожие инструкции для RS6000 - 7026 - H70

Бренды по названию

Популярные бренды

IBM RS6000 - 7026 - H70, Руководство по обслуживанию

Результаты поиска

Содержание RS6000 - 7026 - H70

Отзывы:

Похожие инструкции для RS6000 - 7026 - H70

Бренды по названию

Популярные бренды