IBM RS/6000 H50 Скачать руководство пользователя страница 45

Страница: 45 / 327

Step 1520-6

1. Turn the power off.

2. Unplug the system unit power cable from the wall outlet.

3. Record the slot numbers of all the ISA and PCI adapters. Label and record the

location of any cables attached to the adapters. Remove all the adapters.

4. Remove all installed memory cards.

5. Remove the CPU card(s).

6. Unplug the power cables from all the SCSI devices.

7. Unplug all the fans, except the fan in the power supply.

8. Connect the system unit power cable to the wall outlet.

9. Turn the power on.

Does the fan in the power supply turn on and the power light on the operator
panel come on and stay on?

Replace the I/O board. Go to "MAP 410: Repair Checkout" in the
Diagnostic Information for Multiple Bus Systems.

YES

Go to “Step 1520-7” on page 2-16.

Chapter 2. Maintenance Analysis Procedures

2-15

Содержание RS/6000 H50








































































































































































































































































































































Результаты поиска

Содержание RS/6000 H50

Отзывы:

Похожие инструкции для RS/6000 H50

Бренды по названию

Популярные бренды

IBM RS/6000 H50, Инструкция по установке и обслуживанию

Результаты поиска

Содержание RS/6000 H50

Отзывы:

Похожие инструкции для RS/6000 H50

Бренды по названию

Популярные бренды