IBM Netfinity 6000R, Руководство по установке

Страница: 28 / 66

16
IBM® Netfinity® 6000R Installation Guide
Note: The illustrations in this document might differ slightly from your hardware.
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to the following Web site and use a search term of ESD:
http://www.ibm.com/
To install an additional microprocessor kit:
1. Review the information in “Safety” on page v.
2. Turn off the server and remove the power cords.
3. Remove the top cover.
4. If you are installing a microprocessor in slot 4, remove the terminator card from
the connector.
5. Install the microprocessor.
6. Install the top cover.
7. Cable the server and connect all power cords.
Terminator card
Latch
Microprocessor
Latch