Chapter 2. Installing options
15
Installing a microprocessor
Your server comes standard with one microprocessor installed in microprocessor
connector J34 (slot 1) on the system board, and a terminator card in microprocessor
slot 4. The microprocessor in slot 1 is the startup (boot) microprocessor. If more than
one microprocessor is installed, the highest numbered microprocessor is the
microprocessor from which the server will start. The lower numbered
microprocessors are used as application microprocessors.
Note:
The illustrations in this document might differ slightly from your hardware.
PCI slot 1
32-bit
PCI slot 2
64-bit
66 MHz (J51)
PCI slot 3
64-bit
66 MHz (J52)
PCI slot 4
64-bit
66 MHz (J53)
PCI slot 5
64-bit
33 MHz (J54)
PCI slot 6
64-bit
33 MHz (J55)
Microprocessor slot 1 (J34)
Microprocessor slot 2 (J35)
Microprocessor slot 3 (J36)
Microprocessor slot 4 (J37)
Memory board (J40)
Battery
PCI hot-plug
switch card
(J1)
Содержание Netfinity 6000R
