IBM iSCSI Host Bus Adapter страница 47 Скачать руководство пользователя | Manualshive

Страница: 47 / 62

background image

Remove and replace the System x, xSeries, or blade server
iSCSI HBA

Learn the hardware and software configuration tasks to remove and replace an iSCSI HBA. Use the
instructions in this section to accomplish these tasks.

Stop the iSCSI integrated System x, xSeries, or blade server

Locate instructions to stop your integrated server.

To stop the iSCSI HBA integrated server, refer to the Start and stop an integrated server topic in the web
site http://publib.boulder.ibm.com/infocenter/iseries/v5r4/topic/rzahq/rzahqntspo.htm. Successfully
stopping an iSCSI HBA integrated server will turn off the power to the integrated server.

Remove the System x, xSeries, or blade server iSCSI HBA

Locate instructions to remove the adapter.

Once the iSCSI HBA integrated server has been stopped, removing the iSCSI HBA from a System x,
xSeries, or blade server is not any different from removing any other adapter from either server. See the
documentation for your System x, xSeries, or blade server and return to these instructions to complete
configuration.

Note:

Any Ethernet cables plugged into the System x or xSeries iSCSI HBA should be labeled and

disconnected prior to removing the iSCSI HBA. You will not have to disconnect any Ethernet cables from
the blade server as these connections are made through the BladeCenter midplane.

Replace the System x, xSeries, or blade server iSCSI HBA

Before you continue with this procedure print the

iSCSI Network Planning Worksheets

in the

iSCSI Network

Planning Guide

Select System x, xSeries, or blade server replacement from the following list:

Important:

In either procedure make a note of the MAC addresses from the sticker on the iSCSI HBA in

the

iSCSI Network Planning Worksheets

.

v

System x or xSeries: Refer to the System x or xSeries server documentation to perform this task. Any
Ethernet cables connected to the original iSCSI HBA will need to be reconnected after the replacement
iSCSI HBA is installed.

v

blade server: Refer to the blade server documentation to perform this task.

Configure the replacement iSCSI HBA

The new iSCSI HBA will need to be configured to match the replaced iSCSI HBA. Also, the remote
system network server configuration object associated with the xSeries or blade server this iSCSI HBA is
installed in will need to be updated to reflect the new iSCSI HBA hardware.

© Copyright IBM Corp. 2004, 2007

35

«
...
45
46
47
48
49
...
»

Содержание iSCSI Host Bus Adapter































































Отзывы:

Нет отзывов

Похожие инструкции для iSCSI Host Bus Adapter

Бренд: Radicom Страницы: 62

Бренд: Beyerdynamic Страницы: 54

Бренд: LSI Страницы: 46

Бренд: Devolo Страницы: 22

Бренд: Skross Страницы: 2

Бренд: Brainboxes Страницы: 10

802.11g PCI Card Wireless Adapter

Бренд: 2Wire Страницы: 17

Бренд: Acard Страницы: 26

Miracle WiFi 150N HighGain

Бренд: Miraclebox Страницы: 20

Бренд: JVC Страницы: 6

Бренд: JVC Страницы: 11

Бренд: JVC Страницы: 4

Бренд: JVC Страницы: 18

Бренд: JVC Страницы: 4

Бренд: JVC Страницы: 24

Бренд: JVC Страницы: 4

Бренд: JVC Страницы: 8

Бренд: JVC Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды