Obtain and update remote system network server configuration object
information
You will need to update the remote system network server configuration object information after you
reinstall the adapter. Use the procedure in this section to accomplish this task.
To complete the following procedure you will need the
iSCSI Network Planning Worksheets
you filled in
during the initial installation of this iSCSI Host Bus Adapter. If you are not able to locate these
worksheets you will have to print and fill in a new set. For instructions see iSCSI Network Planning
Guide.
Remember:
Ensure that you record the Media Access Control (MAC) address from the new iSCSI
adapter in items RS11 and RS15 of the planning worksheets.
1.
Open iSeries Navigator.
2.
Select
Integrated Server Administration
→
iSCSI Connections
→
Remote Systems
.
3.
Right-click on the appropriate remote system configuration in the list and select
Properties
.
4.
Click the
Boot Parameters
tab.
5.
Record in the
iSCSI Network Planning Worksheets
(item RS6) if either
Dynamically delivered to
remote system via DHCP
or
Manually configured on remote system options
is indicated.
6.
Click the
CHAP Authentication
tab.
7.
Record in the
iSCSI Network Planning Worksheets
(item RS7) if either
Do not use CHAP
or
Use the
following values for CHAP authentication
is indicated.
8.
Record the
CHAP
name (item RS8) and
CHAP secret
(item RS9) values in the
iSCSI Network
Planning Worksheets
if CHAP is being used.
9.
Click the
Network Interfaces
tab.
10.
Select the interface you are configuring and click the
Properties
tab.
11.
Change the value for
Remote SCSI interface: Local adapter (MAC) address
to the value copied
from the adapter and entered in the
iSCSI Network Planning Worksheets
(item RS11).
12.
If the
Manually configured on remote system
option was selected, note the values for
Remote SCSI
interface: Internet address
(item RS12),
Remote SCSI interface: Subnet mask
(item RS13) and
Specific iSCSI qualified name
(item CQ6) in the
iSCSI Network Planning Worksheets
.
13.
Change the value for
Remote LAN interface: Local adapter (MAC) address
to the value copied from
the sticker (TOE) on the adapter and entered in the
iSCSI Network Planning Worksheets
(item RS15).
14.
If the
Manually configured on remote system
option was selected, note the values for
Remote LAN
interface: Internet address
(item RS16) and
Remote SCSI interface: Subnet mask
(item RS17) in the
iSCSI Network Planning Worksheets
.
15.
Click
OK
to complete the update.
16.
Click
OK
to close the window.
17.
Click the
Storage Paths
tab on the network server description properties window.
18.
Select the storage path with the desired NWSH name and click the
Properties
button.
19.
If the
Manually configured on remote system
option was selected, note the value for
iSCSI
qualified name (IQN)
in the iSCSI Network Planning Worksheets (item CQ6).
Complete the replacement iSCSI HBA configuration
Locate instructions to complete the configuration of your iSCSI HBA.
Once you have updated the
iSCSI Network Planning Worksheets
with the new information from the
previous procedures, “Replace the System x, xSeries, or blade server iSCSI HBA” on page 35 and “Obtain
and update remote system network server configuration object information,” you can complete the
configuration of the iSCSI HBA by following the procedure in “Configure iSCSI HBA” on page 17.
36
System i and System p: iSCSI Host Bus Adapter for IBM BladeCenter, System x, or xSeries
Содержание iSCSI Host Bus Adapter
