IBM IntelliStation Z Pro 6221, Руководство по техническому обслуживанию аппаратной части, Страница: 97 / 168

Error code/symptom FRU/action
015-XXX-015
(Failed USB External
Loopback test)
1. Make sure parallel port is not disabled.
2. Verify wrap plug is installed.
3. Re-run USB External Loopback test.
4. System board.
015-XXX-198
(USB device connected
during USB test)
1. Remove USB devices from USB1, USB2, USB3, and USB4.
2. Re-run test.
3. System board.
020-XXX-000
(Failed PCI Interface test)
v
System board
030-XXX-000
(Failed Internal SCSI
interface test)
v System board
030-XXX-00N
(Failed SCSI test on PCI slot
N.)
1. If N>0, adapter in slot N
2. If N=0, system board
035-XXX-099
(No adapters were found)
v If adapter is installed, re-check connection.
035-XXX-S99
(Failed RAID test on PCI slot
S. S = number of failing PCI
slot.)
1. Adapter
2. Cable
035-XXX-SNN
(S = number of failing PCI
slot; NN = SCSI ID of failing
fixed disk.)
v
Fixed disk (hard disk drive) with SCSI ID NN on RAID adapter in PCI slot S
035-253-S99
(RAID adapter initialization
failure)
1. ServeRAID adapter in slot S is not configured properly. Obtain the basic and
extended configuration status and refer to the ServeRAID Hardware Maintenance
Manual for more information.
2. Cable.
3. Adapter.
075-XXX-000
(Failed Power Supply test)
v Power supply
089-XXX-001
(Failed Microprocessor test)
v
Verify microprocessor is installed and seated correctly.
v
Verify latest version of BIOS code is installed.
v
Microprocessor.
089-XXX-002
(Failed Optional
Microprocessor test)
v Verify optional microprocessor 2 is installed and seated correctly.
v Verify latest version of BIOS code is installed.
v Optional microprocessor 2.
180-XXX-001 (Failed Front
LED Panel test)
1. Power switch assembly
2. Power switch assembly cable
3. System board
180-XXX-003
(Failed System Board LED
test)
v
System board
Symptom-to-FRU index
87